"Mag"Heads 

17x10mm "Mag" Heads (Weight = 1. 5 Gram)

I think the 1p shows just how small these are- these must be the smallest/lightest weight  Indicator head ever made, and don't forget the line clip is built inside also!  For very light weight Indication these are Ideal.

32x10mm "Mag" Heads (weight = 3 Gram)

A 15x3mm Isotope can be fitted inside the central chamber ,which can then be seen from any position. 

32x15mm "Mag" heads (Weight = 6. 5 Gram)

A 15x3mm Isotope can be fitted inside the central chamber ,which can then be seen from any position.

45x15mm "Mag" Heads (weight = 10 Gram)

A 25x3mm Isotope (Solar)can be fitted inside the central chamber ,which can then be seen from any position.

The line clip mechanism is of a radical new design , which works by means of a micro Neodymium Magnet which provides the "Pull force" for the single Ball Bearing . It has proved to be a 100% reliable design with Braid & Mono. There's no messing about setting the clip as it is Pre-set  via the Magnet.

All 4 sizes will fit any British built Indicators 

17x10mm   price £5.00 each

32x10mm   price £6.50 each

32x15mm   price £6.50 each

45x15mm  price £7.00 each

+ Postage

It is highly recommended to dry the Bearing/magnet by running a bit of card  through the line slot after use,as the Bearing /Magnet have to be "Semi - Stainless" ( full stainless is none magnetic) I personally have just been giving my own set a squirt of WD 40 every so often..

  Multi-Heads

32x20 Multi-Heads (weight = 14 Gram)

A 15x3mm Isotope can be fitted inside the central chamber ,which can then be seen from any position. 

45x20mm Multi-Heads (weight = 17 Grams)

A 25x3mm Isotope can be fitted inside the central chamber ,which can then be seen from any position. 

Giant 70x20mm Multi-Head ( weight = 30 Grams)

These will fit 2 off 25x3mm Isotopes in line!

The Multi-Head is a unique Indicator head which incorporates the line clip and Isotope chamber all in one neat Acrylic unit.  The Stainless steel line clip mechanism is a precise as you can get , with micro adjustment achieveable via the two Allen Key adjustment screws. Just as effective with Braid or Mono also very line friendly. The Body is machined from solid Acrylic "which is no easy task!" but far superior than a moulded unit. Available in high magnification Red,Blue,Green,Yellow,white and Crystal.

 Compatable with all British Built Indicator Systems.

Available in 3 sizes

32x20mm price £8.00 each

45x20mm price £8.00 each

70x20mm price £10.00 each

(Free Allen Key provided per set)

 + Postage

 Standard Heads

A wide selection of these Basic Heads can be made at request.

 Price £4.00 each (any size)

HG Hawk Hangers

Shown with a Green 32x10mm Mag head fitted.

  The cost of the heavy gauge Sterling Silver Chord (nearly 3mm thick!) it made me very reluctant to make these, but these are as "Tackle Tarty" as you can get! (I was getting some stick for being the only one who had them!) and from my own experience don't seem to be effected by wind. Due to material costs thou, will only be made with 6" Chords.

Fitted with a 32x10mm or 32x15mm Mag Head in any colour.

Price £20.00 each + Postage

6" HG Chord £12.00 each + Postage

LG Hawk Hangers

Sterling Silver Ball Type chain (51/2" Long as standard)

Two light weight versions of the popular Hawk Hanger have been developed. Both fitted with strong,light weight,solid Sterling Silver Chains Fitted with 17x10mm or 32x10mm Mag Heads as standard in any colour you wish. 

Sterling Silver Curb Type chain (6" long as standard)

Price - £15.00 each + Postage

LG Hawk Chords

Both versions of Silver chords can be purchased separately with standard MPS Quick release fittings or 2BA Studs at request.

Price - £7.50 each + Postage

Scorpion MKII Indicator

The first indicator MPS ever designed, a ground breaking design which gives two types of indicator all in one unit.  Without a rod fitted into the chamber of the stainless steel armoured tube you have a stable "hanger" type indicator, then if you insert either of the rods (or both) into the chamber you have an instant "tension arm" indicator.

The MKII has  improvements on the original , a micro ball joint is now used to fit the Multi-Head allowing  360 Degrees of rotation plus allows the Multi-head to self level and also makes alignment with the line easy to achieve.

The expensive Industrial Quick Release Fittings have been retained due to customer demand! so as the Laser cut stainless steel buzzer fitting. Fitted with any colour  32mm or 45mm long Multi-head you wish.

Price  £20.00 Each + Postage

 The Banshee Hanger

 During 2004 MPS was inundated with requests for a "Hanger" type of indicator. So The Banshee was designed , using exactly the same Buzzer fitting and Quick Release as the Scorpion  MKII.  The cord used  is of a radical new design , being made from 1.5mm thick woven 316 marine Grade Austenitic Stainless Steel. As smooth as silk , supple but with a little springiness, and has a breaking strain in excess of 135kg!

Fitted  with  6"or 9"long chords as standard.  During field testing (to our amazement)We found the Banshee to be just about "Wind Proof "and this was in a storm!   Fitted with any size/colour of  Mag - Head you wish.  

Price   £15.00 Each + Postage 

Banshee Chords

Banshee chords are now available separately in  6" & 9" lengths. Fitted with a MPS Stainless  Quick Release fitting at one end and a 2BA Stud at the other and at request 2BA Studs at each end. 

 Price  £6.00 Each + Postage

"LR" Banshee Hanger

An upgraded version of a normal Banshee,being designed for two situations only - Long Range and Snag fishing at Range.  With a 3mm thick, 6" long, high tensile 316 Stainless Cord

"it's all they can be used for!"

Giving a Bow string tight tension to the main line be it Mono or braid, Line clips must be fitted to the Rod in order to get this chord into a nice "U" shape. Also it's advisable to make sure nothing is in the way that the Multi-heads can hit when "Flying Back" (as it will get smashed to bits if it hits something solid at such force) Only Multi-heads can cope with all this extra tension - and only just at that!

Fitted with either a  32x20mm or 45x20mm Multi-heads in any colour. 

Price £17.00 complete + Postage

LR Banshee chords are now available separately in  6" & 9" lengths. Fitted with a MPS Stainless  Quick Release fitting at one end and a 2BA Stud at the other and at request 2BA Studs at each end. 

 Price  £7.00 Each + Postage

Warlock "Slackliner"

A new version of the Warlock,which with the help of a MPS customer Jason Hayward has been specifically designed for slack line fishing. With the ability to "Lock out"  so zero resistance can be achieved on the line ( it can also be used as a normal swinging arm indicator with a sliding weight fitted to +/- tension) With a unique 360 degrees of rotation  available at both the Buzzer and Head end ,"It's full floating!" In other words it lines itself up at both ends!

It was found during fieldtesting that you must use a running Lead set up if used in a situation were the Fish could swim towards you, with a lead of 4oz+, this gives a "Anchor point" for which the slack line can be tighten up from =  indication

(No matter what direction the Fish swims you will get the Warlock arm flying up)

With a semi-fixed Lead it was useless, as the fish can swim straight at you dragging the Lead along and just doubling the line up, not tightening it at all  = no indication 

The unique precision ball joint, as fitted at each end of the Warlock "slackliner" giving a 360/full floating ability. 

Fitted with any size/colour "Mag"Head of your choice

Price £17.00 + postage

"Monkey Climbers" (2008 Style)

To my surprise these up to date "Monkey Climbers" have proved to be rather popular!

The 32x20mm Bobbin has a version of the relable Magnetic Line clip as used in the Mag Head range, also a chamber to take a 15x3mm Isotope is located central in the base of the Bobbin. The All Stainless Needles are 12" long as standard and have a 3/8"BSF Stud at the base so they can be fitted to Single bank Sticks or a Custom Built Ariel Bar as fitted to the HD Trident above.

A set of Monkey Climbers on a Custom Built "Spiked"  Ariel Bar

Cost

Complete Needle/Bobbin £15.00 Each +Postage

 Custom Ariel Bar £20.00 Each +Postage

Stubby 4"Bank Sticks £5.00 Each +Postage