Rod Stays

As "begged for" by customers, all parts are fitted to one main "Y" shaped base plate, fitted with MPS Q/R Indicator fittings as standard.  

The upright rods are plenty long enough to stop the Rod jumping out of the Buzzer if you get a violent take to one side, the base plate has been designed as to not get in the way of Jack plug sockets and Ariel's,on the most common Buzzers used.

A custom made Rod Stay with a 2BA Indicator fixing, also "De-Tagged" versions have been made so any other form of Indicator bracket can be used in conjunction with the Rod stays.

Price £15.00 each + Postage

 Buzz & Snag Bars

A wide range of various Buzz bars can be made at request , all made from 316 Marine grade s/steel tubing and within reason can be made any width to suit your own individual requirements.

Examples

* 2 Rod  fixed width with single stud                       = £10.00 each

*2 Rod Goal Post (studs under end fittings)           = £12.50 each

*3 Rod  fixed width with single central stud            = £15.00 each

*3 Rod fixed width two stud snag bar format          = £20.00 each

*3 Rod Goal Post (studs under end fittings)           = £17.50 each

*4 Rod fixed width two stud snag bar format          = £25.00 each

*3 Rod Adjustable width two stud snag bar format = £25.00 each

A pair of custom built 24" wide 4 rod Snag Bars with "Tilt Fittings"  

3 Rod / 3 Stud Buzz Bars in Snag Bar Format 

3 Rod / 3 Stud in Goal Post Format

3 Rod , Single Stud Buzz Bars

3 Rod Adjustable Snag Bars

"Swan Neck" Adjustable Buzz bars

These are of  a "Strange Design!" and was originally built by MPS at the request of a well known UK carp angler.  Only available in one width 12" but  will extend to 18" wide, a utter nightmare to make (hence the price)  Fitted with a single central stud made from 100% high grade stainless steel.

COST = £60.00 A Pair   + postage

  MKII Buzzer Quick Release Fittings

These Stainless Steel MKII Quick release fittings have been designed to fit directly over the head of MPS 1/2" diameter Bank Sticks, but are also supplied with a stud to allow fitment to Buzz Bars if desired. This means you can use your Alarms on your Buzz Bars and then if required remove and fit your Alarms directly onto your Std MPS Bank Sticks in seconds without having to remove anything (as shown) Locking in place is via a flush fitting Allen Screw (nothing protruding to catch your line on) 

# Also useful if a "Spacer" is required under the Buzzer.

Price-£7.00 each + postage